The DLP-PROP is a pre-assembled, USB-powered module for developing with the new Propeller™ chip from Parallax.  A FT232RL chip from FTDI is used to provide the USB interface.  This module has an on-board 3.3V regulator, EEPROM for program storage and comes in a standard 0.9-inch wide, 40-pin footprint.  User electronics can be connected via the 28 unused I/O pins.

The Propeller is clocked via a 6MHz external clock.  Using the on-chip PLL in the Propeller, the following clock frequencies can be generated internally: 6, 12, 24, 48 and 96MHz.

The DLP-PROP was developed to be fully compatible with Parallax’s new Spin™ programming language and development environment. For detailed operating instructions, refer to the Propeller Manual, available from the Parallax website.

  • Simultaneous multi-processing via eight 32-bit processors in one chip

  • Programmable in both Spin™ and assembly language

  • Permanent unique serial number accessible via USB

  • Firmware upload via USB port

  • Fully assembled & ready for use

  • Onboard 3.3V regulator and EEPROM for program storage

  • Onboard LED available to the Propeller or user electronics

  • USB port powered from host PC (USB 1.1/2.0 Compatible)

  • USB drivers provided for Windows XP, XP x64, Server 2003, 2000, Windows CE, Linux and Mac OS

  • Lead-free, RoHS compliant

  • DLP-PROP Datasheet

  • VCP Drivers
  • D2XX Drivers

The DLP-PROP is available on-line from Mouser Electronics or the FTDI Chip Shop.



For more details checkout Future Technology Devices International Ltd.





Copyright © 2006 - 2009 Ignite Automation